The Muc-Off Secure Tag Holder offers a secure way to install a tracker on your bike frame using the bottle cage mounting holes, so you can track your bike if it's stolen and be able to locate it. Your tracker will be housed in a machined aircraft grade 6061 aluminum body, which comes with T25 security bolts and a security key for an added level of protection against theft. Secure Tag Holder 2.0 now features slotted water bottle cage mounts, designed to work with most existing standard water bottle cage mounts (64mm wheelbase) and offer greater adjustability.

- Compatible with Apple AirTags ( purchased separately)
- Fits securely under the bottle holder
- Supplied with 2x 25mm T25 security bolts and 1x security key
- Does not block the tracker's signal or sound
- Design that makes no noise to hold the tracker securely in place
- Weight: 21 g
- Dimensions: 85.5 x 35.5 x 10.25 mm

PLEASE NOTE: Tracker not included in the stand

HOW TO INSTALL IT?

- Unscrew the base plate using a 3mm hex wrench on the two bolts.
- Make sure the tracker is connected to your tracking app, then insert it into the body recess with the battery cover facing you the base plate.
- Reinstall and tighten the base plate screws until there is no movement in the base plate or the tracker inside. Caution - Do not overtighten the base plate screws.
- If using with a water bottle cage, remove the bottle cage and existing screws.
- Using the supplied security key, align the Secure Tag Holder site with holes in your bottle holder, then place the bottle holder on top.
- Place the security Torx bolts through each hole in the top of the bottle holder and then through Secure Tag Holder and thread into place. (Always apply our Bio Grease to the bolt threads and follow the tightening torque - recommended by the frame manufacturer for tightening bottle cage bolts).
- Tighten until the bottle cage and Secure Tag Holder is secure.