Suspension shock absorbers spring tools Workshop
"- maximum capacity approx. 1050 kg / 10200 Nm - maximum opening width 300 mm - with 3 sets of Jaws  , , 70 - 105 mm  , , 90 - 140 mm  , 130 - 190 mm - chrome molybdenum steel - plastic coated jaws protect the springs from a loss  , of the antirust coating"
- professional , spring compressor for daily , use in workshops - includes 2 spring plate pairs, universally applicable  , for almost all MC Pherson struts - maximum load: 1.650 kg (16.150 Nm) - max. clamping width: 360 mm - min. clamping width: 75 mm - spindle: M 15 x 300 mm
spring strut spanner set for mercedes benz - NEW: now with Torque Bar - max. compressive force up to 2500 kg - suitable for Mercedes Benz models: W124, W126, W129, W140, W170, W201, W202, W210 and other cars - incl. 2 spring retainer sets for front and rear axle (main unit has to be attached in the
- suitable for most McPherson struts  , with cylindrical and conical springs - for BMW, Toyota, Ford, Mitsubishi, VAG, Saab,  , , Nissan, Honda, Subaru, Volvo, Opel, Porsche, etc. - 3 jaw pairs for the following spring diameters:  , 70 - 105 mm / 90 - 140 mm / 130 - 190 mm - contents
8-piece assembly tool for shock absorbers with spring stop - allows an easy mounting of shock absorbers with tension stop springs - the tension stop springs prevent a complete pull-out of the piston rod and makes it difficult to assemble the spring plate (camber plates) - the tool allows a complete
spindle from spring strut spanner set bgs 1136 - max. compressive force up to 2500 kg
180-240 mm jaws, bmw & renault, special size for bgs 980 - to extended the range of spring tensioner BGS 980 - suitable for cars with 120 - 240 mm spring
bench vice clamping tool for struts - for clamping MC Pherson struts - facilitates working on spring and shock absorbers - protective rubber jaws prevent damage to the strut - suitable for fixed mounting on the workbench - material: S45 carbon steel, phosphate coated
8-piece strut tool set - contains essential tools for upper piston rod nuts on the shock absorber and for spreading the strut clamp in the pivot bearing - includes the following spreading sockets: 5.0 mm spreader, 60 mm long, 1/2"
- black finish - length 300mm - min. width of the clamping arms: 105 mm  , , (important for access by wishbone) - max. spring diameter: 150 mm - clamping range: 185 to 380 mm  , , (may vary depending on spring diameter) - spindle length 300 mm - torque via 23 mm hex.
special wrench for shock absorber with oval pins - fits all common types of shock absorbers with oval pins - two different wrench sizes: 5 x 8 mm and 6 x 9 mm - safer and easier to use than locking pliers - wrench ends slightly angled, for more loosening space - chrome plated, length 182 mm
pin wrench for shock absorber screwing, mercedes - for losening the upper shock absorber screwing - the recess in the front part of the pin wrench allows counterholding of the piston rod - plastic coated shaft prevents damage - suitable for Mercedes Benz 211 T-Model rear axle (E-Class Station Wagon)
spreader socket set for spring strut clamp, 5 x 7 mm and 5.5 x 8.2 mm - for spreading spring strut clamps on VAG, BMW, Citroen, Ford, Renault wheel bearing housings - drive: 1/2"