Universal extractor Workshop
universal 3-leg bearing ring puller - for removing of bearing ring and sleeves - ultra sharp jaw edges allow to clamp in between 0.5 mm - suitable for bearing rings and sleeve diameters from 10 to 125 mm - extractor can be pre-tensioned by closing the cone
12-piece puller set, 2- and 3-leg - pulling depth up to approx. 105 - 210 - 265 mm, pulling width up to max. 135 mm - puller legs are suitable for 2- and 3-leg crossbars (included) - free moving legs allow internal and external pulling operations - hardened pulling feet (width approx. 25 mm, thickne
parallel jaw puller, 2-legs, 350x200 mm
parallel puller, 250x200mm, fine thread - forged
12-piece inside and outside puller set, 2 / 3 legs - suitable as inside and outside puller - includes the following tools: - 3 puller arm sets (3 pcs. per set) for puller depth of 100, 200 and 300 mm - puller feet thickness: 4 mm - puller feet witdh: 20 mm - puller yoke with 2 boom, width range: 35
universal puller set - suitable for inside and outside use - length of puller legs: 120 - 230 - 280 mm - puller width: 60 - 180 mm
13-piece windscreen wiper arm puller set - universal application - with sliding hammer and ejection arbor - 2-arm gear puller, suitable for following cars: Audi, BMW, Chrysler-Jeep, Citroen, Fiat, Ford, Honda, Hyundai, KIA, Land Rover, Mazda, MG-Rover, Nissan, Peugeot, Porsche, VW, MAN, MB, Scania -
parallel jaw puller, 2-legs, 250x200 mm
internal / external puller, 2-arm + 3-arm use, 76-178 mm, 180 mm deep - one puller with a wide range of applications - can be used with 2 or 3 arms and as internal and external puller - clamping width 76-178 - clamping depth 180 mm
parallel puller, 200x150 mm, fine thread - forged
2 / 3 jaw puller set - allows working with 2 or 3 claws - includes:  
parallel puller, 160x150mm, fine thread - forged
puller, reversible twin leg, 400 mm - usable as puller for inside and outside - max. puller wide: 400 mm - max. puller depth: 400 mm - forged - with ball tip
windshield wiper arm puller bmw - suitable for e.g. following BMW models: E12, E21, E23, E24, E28, E30, E30C, E31, E32, E32/3, E34, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E38, E38/3, E39, E39PL, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E 65, E66, E67, E85, RR1 - adjustable puller cla
parallel jaw puller, 3-legs, 150x200 mm
puller, reversible twin leg, 400 mm - usable as inside and outside puller - max. puller wide: 400 mm - max. puller depth: 400 mm - forged - with ball tip
crankshaft and balancer flange puller set - carbon steel, hardened, zinc plated - universal use: incl. 9 adaptors - can be used with item# 7719 - contents:  
puller, reversible twin leg, 300 mm - usable as inside and outside puller - max. puller wide: 300 mm - max. puller depth: 275 mm - forged - with ball tip
parallel puller, 130x100 mm, fine thread - forged
parallel puller, 90x100 mm, fine thread - forged