en
italiano- Free (for Italy) if you reach 89,00
- Write us
- Call: Monday-Friday 10.30-12 / 15.30-17
Engine Pressure Tester Workshop
petrol & diesel engine compression and leakage test kit - suitable for most petrol and modern HDi, TDCi, pump injector and older diesel engines - compression pressure testing up to 50 bar (725PSI) possible - quick couplings in straight and angled versions, for
petrol & diesel engine compression test kit - compression pressure testing up to 50 bar (725PSI) - quick couplings in straight and angled versions - includes:
to be used for passenger vehicles and trucks with turbo engines, diesel and petrol enginesfor checking the charging system components when installedtime saving and professional locating of leakages on air intercooler and charging system componentscan also be used for leakage test exhaust gas recircu
testing tool for turbo charger systems with bayonet adapter - helps to locate leaks in the components of turbocharger systems such as pressure hoses, air-to-air intercooler, etc. - testing must be performed when engine is switched off - for professional and economic diagnosis - includes: - pressure
turbocharger system test set for trucks - for checking the charging system components when installed - allows professional and economic troubleshooting - suitable for turbochargers and compressor systems - incl. pressure regulator with gauge to reduce the test pressure and for leak test - 3 pairs of
- enables testing of the exhaust back pressure- will be connected to oxygen sensor thread of the exhaust system or to flange of exhaust gas recirculation valve- allows conclusions on blockages or constrictions, such as e.g. clogged catalysts or particulate filters thereby preventing expensive repair
- for compression measurement with hose adaptor or rubber-cone measuring tube- spark plug thread adaptor: M10x1.0 - M12x1.25 - M14x1.25 - M18x1.5- 63 mm gauge with LCD-display- switchable units (psi, bar, kpa)- pressure memory for up to 12 cyl.- pressure range 0.1 - 20.6 bar (2.0 – 299.5 psi)- resol
testing tool for turbo charger systems - for checking the charging system components when installed - professional and economic troubleshooting - safety valve prevents applying excessive pressure - suitable for turbochargers, G-chargers, compressors - fits on most charging system hoses - system is c
diesel engine compression testing kit - included various adaptors (for glowplugs and dummy injectors) make this kit useful for many car types - 1 manometer (0-70 bar) (tolerance +-5%) - incl. 90°
testing tool for turbo charger systems, 55-60-65-70 mm - for checking the charging system components when installed - allows professional and economic troubleshooting - suitable for turbochargers, G-chargers, compressors - includes the following adapters: - 2-step pressure adapter for hose sizes 55
compression tester for diesel engines - for testing the compression on Diesel engines - allows professional examination and assessment of engine condition - includes following test tools for many vehicles models: - 70 bar pressure gauge with 500 mm hose - adaptor pipe, 160 mm - injector adapter with
- suitable for compression tester products 8008, 8400, 8401- M8 x 1.0- length 135 mm
compressed air adapter m14 and m18 for cylinder pressure - for filling the cylinder with commpressed air - is used when removing valve springs without removing the cylinder head - for acoustic leak testing of valves, piston rings, head gasket, etc. - suitable for spark plug threads M18 x 1.5 and M14
- suitable for compression tester products 8008, 8400, 8401- M8 x 1.0- length 122 mm
- suitable for compression tester products 8008, 8400, 8401- M8 x 1.0- length 81 mm
- suitable for compression tester products 8008, 8400, 8401- M8 x 1.0- length 112 mm
- suitable for compression tester products 8008, 8400, 8401- M8 x 1.0- length 105 mm
- suitable for compression tester products 8008, 8400, 8401- M8 x 1.0- length 96 mm
- for compression tester for diesel engines BGS 8008
