Tightening wrenches for nuts Ratchets - Adaptors Price Workshop workshop
Tightening wrenches for nuts Workshop
https://www.ridewill.it/c2/en/workshop/6/ratchets-adaptors/72/tightening-wrenches-for-nuts/562/
Tightening wrenches for nuts Workshop
8-piece hook wrench set, 35 - 120 mm - suitable for DIN 1804 nuts and DIN 981 bearing nuts - for diameters: 35-60, 60-90, 90-120 mm - hook and pin lug are interchangeable
hook wrench - length 280 mm, 75 mm jaw - for operating slotted/grooved nuts
face pin wrench, adjustable, 180 mm - range: 11 mm and up - arm length 172 mm (center joint - center pin) - offset front end 11 mm - pin diameter 4 mm - riveted pins
face pin wrench set, adjustable - face pin wrench, length: 245 mm - special steel, hardened, zinc-plated - with 8 exchangeable pins - only one wrench needed for all standard pins - pin diameters: 2,5 - 3 - 4 - 5 - 6 - 7 - 8 - 9 mm - spanning width 102 mm
11-piece special socket set for grooved nuts, km0 - km10 - for gentle loosening and tightening groove nuts - suitable for e.g. bearing nuts - 1/2"
pin wrench for suspension joints, citroen / peugeot - for loosening / tightening of suspension joints - suitable for models: Citroen BX (9/82-94), C5, Xantia Peugeot 305 (7/82-90), 405 (6/87-), 406, 605, 607 etc.
groove nut socket, mb actros, 105 - 125 mm - suitable for Mercedes Benz Actros rear axles, HL/HL 8 (Hypoid) etc. - made according to DIN 3121 / ISO 1174 - high accuracy - extremely robust execution - suitable for high tightening and loosening torque - inner diameter: 105 mm - outer diameter: 125 mm
pin socket for mercedes-benz m-class joints - suitable for suspension ball joints on front and rear axles on Mercedes-Benz M-Class W163 and W164 - flat type
groove nut socket, mb atego, 80 - 95 mm - suitable for Mercedes Benz Atego rear axle, Vitaro 814, MAN, etc. - made to DIN 3121 / ISO 1174 - high accuracy - extremely robust execution - suitable for high tightening and loosening torque - inner diameter: 80 mm - outer diameter: 95 mm - locating tube d
pin wrench socket for ball joint, mercedes m-class
groove nut socket for ford transit with type 34 axle
transmission clutch front main shaft socket 72/80 mm
5-piece groove nut socket set - suitable for Mercedes differential, gear and rear axle flange - for Mercedes series 107 - 114 - 115 - 116 - 126 etc. - allows gentle loosening and tightening using a torque wrench - 1/2 "
Features: - For KM 0-1-2-3-4-5-6-7-8-9-10-11-12 ring nuts - Square connection: 1/2 " - Length: 60 mm
en
italiano
