Lifting equipment Automotive tools Price Workshop workshop
Lifting equipment Workshop
https://www.ridewill.it/c2/en/workshop/6/automotive-tools/74/lifting-equipment/637/
Lifting equipment Workshop
1 pair of axle stands, 3 to./pair, 315-485 mm - black lacquered finish - adjustable steel pin (315-485 mm) - minmum ordering quantitiy: 2
engine crane 2000 kg, double piston type - especially suitable for disassembly / assembly of heavy drive units - folding mechanism for space-saving storage - capacity: up to 2000 kg - lifting height: 25 - 2300 mm - dimensions (LxWxH): 1800 x 1040 x 1568 mm - dimensions, folded (LxWxH): 850 x 800 x 1
engine crane, 1000 kg - engine crane for lifting engines and other heavy loads - lifting arm can be adjusted in 4 positions of different length - technical data:
4-point engine support - especially suitable for vehicles with auxiliary frame - prevents undesired twisting and tilting of the engine - two positionable longitudinal beams for support on front panel - rubber protected front panel support feet - can also be used without longitudinal beams - includin
engine / gearbox support - secure support of engine or gearbox during assembly - is required for e.g. disassembly of the engine mount, timing belt and replacement of clutch - sturdy square tube construction - feets and support plate are height adjustable and lockable - rotatable retaining hooks, adj
hydraulic vehicle positioning jack, lifting capacity 600 kg - easier to maneuver in the smallest space - ideal for exhibitions, workshops and towing companies - load capacity 600 kg per positioning jack - tire width up to max. 330 mm - ground clearance: 160 mm - max. lifting roll distance: 610 mm (e
2 piece folding ramp set - multi-purpose and mobile - for loading and unloading quads, motor bikes, lawn mowers etc. - can also be used as car stand when folded - suitable for trailers with 700 to 900 mm loading height - maximum capacity per ramp: - 1.100 kg (folded) - 350 kg (unfolded) - space savi
hydraulic vehicle positioning jack, lifting capacity 600 kg - easier to maneuver in the smallest space - ideal for exhibitions, workshops and towing companies - load capacity 600 kg per positioning jack - tire width up to max. 290 mm - ground clearance: 145 mm - max. lifting roll distance: 650 mm (e
chain hoist, lifting range 2.5 m, capacity 2 to. - closed body - minimal amount of manual work needed due to special power transmission even when max. load capacity is reached
engine support xl, 750-1450 mm, 500 kg - for assembling and disassembling of engine and gearbox - strong square-type tube - adjustable width - hooks with threaded rods M20 x 2.5 - rubber pads protect fenders - with two chains, each chain 90 cm long
car positioning shells, 1 pair - capacity / piece: 450 kg - ideal for maneuvering in small areas - 4 steel castor wheels - max. tyre width: 360 mm - dimensions: 385 x 605 mm - max. tyre width: 360 mm - dimensions: 385 x 605 mm
engine support, 1000-1450 mm, 300 kg - for assembling and disassembling of engine and gearbox - strong square-type tube - adjustable width - hook with threaded rod M24 x 3.0 - rubber pads protect fenders - with one chain, 90 cm long
universal engine traverse - 2- and 3-point support on car wing edges and hood latch - wide area of application due to adjustable suspension points - comes with 2 pendant ropes - capacity: 315 kg - cross beams width: 1000 - 1550 mm - longitudinal beam length: 24-fold adjustable 90, 120, 150, 180, 210
farm jack, 400 kg - especially for off-road vehicles with a
chain hoist, lifting range 2.5 m, capacity 1 to. - closed body - minimal amount of manual work needed due to special power transmission even when max. load capacity is reached
hydraulic cylinder for item# 1975
1 pair of axle stands, 6 to/pair, 420-600 mm - heavy duty, 4 leg finish - 10-step ratchet-type action - saddle height between 420 mm and 600 mm - with rubber pad - minmum ordering quantitiy: 2
hydraulic cylinder for engine crane bgs 9245 - piston outside diameter: 25 mm - cylinder outside diameter: 70 mm - total length (extended): 1150 mm - total length (retracted): 630 mm - piston stroke: 520 mm - inner diameter of lower fastening eye: 16 mm - inner diameter of upper fastening eye: 17 m
en
italiano
