Hubs extractors Workshop
hydraulic drive shaft puller, 98-125 mm - for pressing drive shafts out of wheel hubs - especially for glued and rusty drive shafts - suitable for: 4- and 5-hole wheel hubs hole circle diameter 98 to 125 mm wheel bolts up to M14 - spindle can be turned by hand or ratchet - 12-ton hydraulic ram
10to. drive shaft puller set, hydraulic - professional, stable puller for cars, vans and vehicle with bolt circle diameter SUV'
wheel hub puller with sliding hammer - allows the removal of wheel hubs - suitable for cars, SUVs and light trucks - suitable for - 4- and 5-hole hubs - hole circle diameter 98 to 125 mm - wheel bolts up to M14 - 6 kgs sliding hammer - sliding hammer thread: M20 x 1.5 - adapter 1-1/2"
ford wheel hub remover with sliding hammer - suitable for removal and installation of brake discs on front and rear wheel drive vehicles - to be used as OEM 204-345B
16-piece universal puller set with sliding hammer - can be used as internal or external extractor with 2 or 3-claws, for disassembly of 4 and 5-hole wheel hubs and as pulling or impact hammer for body repair - includes following tools: - 2.3 kg sliding hammer - 2 wheel hub adapters - 1 puller yoke w
sliding hammer extractor - suitable for PSA engines - for fast, accurate and professional extraction of stuck valve stem seals without causing damage to the surrounding areas - suitable for inner diameter from 6 to 9.5 mm - sliding hammer thread: M16 x 2.0 - in carrying case
6-piece puller set with sliding hammer, forged - for pulling wheel hub - thread size of inner thread on sliding hammer is BSW 12G - thread size of inner thread of pulling foot is BSW 3/4"
wheel bearing puller with sliding hammer - for flanges with 4 and 5 hole - hole distance of 100 to 115 mm - for wheel bolt size M12 - 4kg sliding hammer - length 570 mm - thread: 5/8"
wheel hub puller for ford transit - suitable for removal and installation of brake discs on front and rear wheel drive vehicles - external thread M24 x 2.0 - incl. adapter for sliding hammer, internal thread M24x2.0 to internal thread M20x1.5 - to be used as OEM 204-345B
universal brake drum puller / drive shaft removal tool - for easy pressing out of drive shafts and for pulling out of brake drums - 5 extraction feet with oval mounting holes, chrome-plated, forged CR-V steel - 2 pressure pieces (flat and pointed) - 10 x 185 mm hardened spindle with 190 mm sliding T
pull adaptor for item # 7719,1677, 7733 - for use with sliding hammer 7719, 1677 - also replacement for 7735, 7745, 7733 - for flanges with 4 and 5 hole - hole distance of 100 to 115 mm - suitable for wheel bolt size M12 - inner thread: 5/8"