en
italiano- Free (for Italy) if you reach 89,00
- Write us
- Call: Monday-Friday 10.30-12 / 15.30-17
Pneumatic screwdrivers Workshop
"1"" impact wrench, 2034 nm" - very handy with pistol grip and additional handle - square drive: 1"
"1"" air impact wrench, 2169 nm" - air pressure: 6.2 bar (90psi) - air consumption 380 l/min - free speed: 3900 rpm - torque: step
"3/4"" air impact wrench, 1355 nm" - weight 2200 g - air consumption 390 l/min - torque: step
"air impact wrench, 3/4"", 1600 nm" - side handle for better grip - square drive: 3/4"
"16-piece air impact wrench set 1/2"", 1355 nm" - heavy duty impact quality for workshop use - 3 protective impact sockets in 17, 19 and 21 mm - 125 mm extension bar - 60 mm universal joint - sockets: 12, 13, 14, 15, 16, 17, 18, 19, 21
"1"" air impact wrench, 2200 nm" - square drive: 1"
"1/2"" air impact wrench ""powerhouse"", 1355 nm" - heavy duty impact wrench for everyday workshop use - forward torque (step 1): 580 - 650 Nm - forward torque (step 2): 745 - 810 Nm - forward torque (step 3): 950 - 1017 Nm - reverse torque (step 1): 610 - 678 Nm - reverse torque (step 2): 950 - 101
- impact mechanism: Twin Hammer - max. torque: 850 FT-LB (1152Nm) - free speed: 7500 R.P.M. - air consumption: 7.4 CFM (210 l/min) - hose inner diameter: 3/8", (10 mm) - air inlet: 1/4", - weight: 5.61 LBS (2.55kg) - length: 6-3/4", (170 mm) - same construction as BGS 3246
air impact wrench 12.5 (1/2), composite housing, 880 nm - very durable, suitable for daily use in workshops - handy and well balanced - drive: 12.5 (1/ 2) - peak torque after 15 sec. 1110 Nm
"1/2"" impact wrench, 610 nm" - square drive: 1/2"
air impact wrench set for glow plugs - allows loosening of stuck glow plugs - can also be used on screws where a low torque is required - 4-stage torque adjustable to approx. 20-30-40-50 NM
"16-piece 1/2"" air impact wrench kit, 366 nm" contents: - 1/2"
"air ratchet, extra-short type, 3/8""" - very handy and powerful type - max. torque: 22 ft-lbs (30Nm) - max. air pressure: 90psi (6,3 bar) - average air consumption: 3.9 CFM (110L/min) - max. speed: 300 rpm - air inlet: 1/4"
"air ratchet, extra-short type, 1/4""" - very handy and powerful type - max. torque: 54 Nm - max. air pressure: 90psi (6,2 bar) - average air consumption: 3.9 CFM (110L/min) - max. speed: 300 rpm - air inlet: 1/4"
"1/2"" reversible air ratchet, 74 nm" contents: - 1/2"
"air ratchet wrench, 1/2""" - special long lasting ratchet mechanism - rubber handle - drive: 1/2"
"1/2"" air impact wrench from # 3223, loose, 366 nm" - loosening torque 332 NM, max. torque 366 NM after 15 seconds - air consumption 113 l/min
"3/8"" butterfly type air impact wrench, 135 nm" - 1/4&ldquo
"3/8"" reversible air ratchet, 34 nm, stubby type" - spring-loaded ball bearing - max. torque: 25 ft-lbs (34 Nm) - max. air pressure: 90 psi - max. speed: 160 rpm - air inlet: 1/4"
