E-Bike Lighting Mounts Bike Mounts
E-Bike Lighting Mounts Bike E-Bike Lighting
https://www.ridewill.it/c3/en/cycling/1/e-bike-parts/76/e-bike-lighting/821/e-bike-lighting-mounts/761/
E-Bike Lighting Mounts Bike E-Bike Lighting
Support mounting e-bike light to the fender - Installation screws included
This is the very first universal solution for all EU license plate sizes! The L1e kit is capable of holding all license plate size variations. The two parts can be adjusted in height, which makes it possible for manufacturers to use one single holder on any S-Pedelec sold anywhere in Europe. Licens
Supernova's high beam is easy to operate at the touch of a button. There are several options for holders on the handlebars. The high beam switch is magnetic and clicks into the respective holder.
Supernova's high beam is easy to operate at the touch of a button. There are several options for holders on the handlebars. The high beam switch is magnetic and clicks into the respective holder.
With its innovative split pivot clamp it can be installed on both sides of the stem without removing a grip, shifters or brake levers. All Supernova lights without an integrated handlebar bracket can be positioned ideally in front of the stem with the universal HBM. The Universal HBM is ideal for t
With its innovative split pivot clamp it can be installed on both sides of the stem without removing a grip, shifters or brake levers. All Supernova lights without an integrated handlebar bracket can be positioned ideally in front of the stem with the universal HBM. The Universal HBM is ideal for t
This mounting bracket for 31.8 mm handlebars positions the light perfectly in front of the stem. A compatible stem like the Supernova CRC stem is required. - For stems with central 31.8 mm clamping space - 4 mm stainless steel screws (M3 Hex key) for handlebar clamp and Stainless steel M5 screw set
This mounting bracket for 31.8 mm handlebars positions the light perfectly in front of the stem. A compatible stem like the Supernova CRC stem is required. SPECS: - Central installation on 31.8 mm handle bar, e.g., JD ST95-A - Stainless steel screw for optimized heat dissipation
Aluminum mounting bracket for front light M99. - Replaces the lower part of the hooking of the Bosch Intuvia and Nyon displays - For M99 front lights - Optimized heat dissipation - For 31.8 mm handlebars
- With threaded M6 hole for threadless fork crown mounting - Ideal for MINI 2, MINI 2 PRO - Dual pivot adjustment, short arm version with stainless steel bolts
- Front light installation on 1 1/8 inch forks - Front light adjustment is still possible after installation!
The perfect version of our successful Multimount bracket for forks with a 6 mm threaded hole. - Special version for threaded holes - Including 35 mm custom made 6 mm stainless steel screw
The high-quality Multimount with its CNC-machined safety lock can be adjusted vertically with its dual pivot points. The mount comes with a V2A stainless steel threaded sleeve on both adjustment screws. The CS-version has a M6 threaded hole. - With threaded M6 hole for threadless fork crown mountin
- The stylish one-piece mounting bracket. - Compact mounting arm, ideal for E3 PURE 3 - 6 mm thick at mounting part - Stainless steel screws
The specially developed bracket for Bosch displays offers a clean installation option for our e-bike lights. For this newly developed part, Supernova introduces its proprietary Pure Carbon Composite (PCC) material. PCC is produced in ultra-high density and carbon reinforced, which makes it stiffer
Tested offroad with two axis adjustment options for perfect beam alignment. Compatible with all our lights that are equipped with the Multimount. It is also handy if you need to remove the light quickly for theft protection. 5-year warrantyon the UV-resistant mounting rings! Adapters for 31.8 mm an
- For all M99 TL 2 for the installation on standard racks with 50 mm holes - Three possible cable exit positions
- Replaces the lower part of the Bosch bracket, for M99 front lights and MINI 2 - Fibre reinforced plastics - For 31.8 mm and 35 mm handlebars, stainless steel screws
- Allows installing the Multimount on road brake mounting screws - May require longer pivot nut on road brakes, 6 mm thick
en
italiano
